[HamWAN PSDR] Kitsap County Gold Mountain HamWAN Attempts, Dish and Sector Antennas K7MM

[Daniel Ransom]

Tom,When I use a mesh dish and the Metal S5HPn, I get signal in only one plane at my test site at the corner of E Collins and Baby Doll Roads.
Perhaps something is up (or down, in this case!).I'll do some additional testing with the dish later this week/weekend.73 from Dan at K7MM



      From: Tom Hayward <tom at tomh.us>
 To: Daniel Ransom <danra995 at yahoo.com> 
Cc: Puget Sound Data Ring <psdr at hamwan.org>
 Sent: Wednesday, January 27, 2016 2:34 PM
 Subject: Re: [HamWAN PSDR] Kitsap County Gold Mountain HamWAN Attempts, Dish and Sector Antennas K7MM
   
On Wed, Jan 27, 2016 at 2:22 PM, Daniel Ransom <danra995 at yahoo.com> wrote:
> Tom,
> Thanks for the tip!  The MIMO function is on:

Very odd! Based on the received signal strength, it would appear only
one chain is running.

> Next I tried to run on only the '0' and only the '1' antennas with the
> "interface wireless set 0 tx-chains=n and rx-chains=n" commands.  The
> result:  no signal.  Is there another way to use only one antenna
> polarization for testing?

This is the only way I know to choose a single chain.

Tom KD7LXL


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20160127/b168ad51/attachment.html>