<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><html><head><meta content="text/html;charset=UTF-8" http-equiv="Content-Type"></head><body ><div style="font-family: Verdana, Arial, Helvetica, sans-serif; font-size: 10pt;"><div>Our club station has a HamWAN client connection, and we have several servers and devices to which I would like to assign 44-net addresses. These addresses would need to be routable from the internet and 44-net. Any networked devices that don't need to be reachable through the internet or 44-net would of course have private nat'ed addresses.<br></div><div><br></div><div>As has been ably expressed on this list, HamWAN supports far more than just web traffic. :) <br></div><div><br></div><div>A /29 block with 6 usable addresses would probably be too small. A /28 subnet with 14 usable IP addresses would be a good fit. Anything bigger would be a waste of 44-net ip space. From reading the HamWAN docs and the wiki.ampr.org web site, any net blocks smaller than /24 should be obtained from a regional coordinator that has one or more multi-user /24 blocks set aside for allocating smaller ip blocks.<br></div><div><br></div><div>Assuming a /28 ip block on 44-net is allocated: I expect I would need to configure OSPF on the HamWAN modem to advertise routes to the /28 ip block over the wlan1 interface.<br></div><div>Presumably an OSPF password would be needed. And of course static IPs from the /28 block would need to be assigned to the servers in question.<br></div><div><br></div><div>First: Am I on the right track?<br></div><div><br></div><div>Second: Is HamWAN such a "regional coordinator" (as mentioned on <a href="http://wiki.ampr.org/" target="_blank">wiki.ampr.org</a>) that can allocate a /28 block for this purpose?<br></div><div><br></div><div>Thanks very much -<br></div><div><br></div><div>John kx7jm<br></div></div><br></body></html>