[n5hc@screst-s3] > export 
# nov/19/2019 18:07:20 by RouterOS 6.44.6
# software id = SM7T-SJV5
#
# model = 912UAG-5HPnD
# serial number = 77BA0733C6E5
/interface wireless
set [ find default-name=wlan1 ] band=5ghz-onlyn channel-width=10mhz disabled=\
    no frequency=5880 frequency-mode=superchannel l2mtu=2290 mode=ap-bridge \
    nv2-cell-radius=100 radio-name=N5HC/Sandia-S1 rx-chains=0,1 ssid=HamWAN \
    tdma-period-size=4 tx-chains=0,1 wireless-protocol=nv2
/interface ethernet
set [ find default-name=ether1 ] speed=100Mbps
/interface vrrp
add authentication=ah interface=ether1 name=vrrp1 password=? \
    version=2
/interface wireless channels
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
    frequency=5920 list=HamWAN name=Sector1-5 width=5
add band=5ghz-onlyn comment=\
    "Cell sites radiate this at 120 degrees (south-east)" frequency=5900 \
    list=HamWAN name=Sector2-5 width=5
add band=5ghz-onlyn comment=\
    "Cell sites radiate this at 240 degrees (south-west)" frequency=5880 \
    list=HamWAN name=Sector3-5 width=5
add band=5ghz-onlyn comment="Cell sites radiate this at 0 degrees (north)" \
    frequency=5920 list=HamWAN name=Sector1-10 width=10
add band=5ghz-onlyn comment=\
    "Cell sites radiate this at 120 degrees (south-east)" frequency=5900 \
    list=HamWAN name=Sector2-10 width=10
add band=5ghz-onlyn comment=\
    "Cell sites radiate this at 240 degrees (south-west)" frequency=5880 \
    list=HamWAN name=Sector3-10 width=10
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=pool1 ranges=44.30.241.18-44.30.241.30
/ip dhcp-server
add address-pool=pool1 disabled=no interface=wlan1 lease-time=1h name=dhcp1
/routing ospf instance
set [ find default=yes ] distribute-default=if-installed-as-type-1 in-filter=\
    AMPR-default out-filter=AMPR-default redistribute-connected=as-type-1 \
    redistribute-other-ospf=as-type-1 redistribute-static=as-type-1 \
    router-id=44.30.241.3
/snmp community
set [ find default=yes ] addresses=44.30.240.0/20 name=hamwan
/system logging action
set 3 remote=44.30.240.232
/ip settings
set send-redirects=no
/interface wireless access-list
add authentication=no forwarding=no interface=wlan1 mac-address=\
    4C:5E:0C:85:5A:BD
add authentication=no forwarding=no interface=wlan1 mac-address=\
    4C:5E:0C:88:FA:71 vlan-mode=no-tag
/ip address
add address=44.30.241.5/28 interface=ether1 network=44.30.241.0
add address=44.30.241.17/28 interface=wlan1 network=44.30.241.16
add address=44.30.241.14 interface=vrrp1 network=44.30.241.14
/ip cloud
set update-time=no
/ip dhcp-server lease
add address=44.30.241.28 client-id=1:4c:5e:c:85:e1:db mac-address=\
    4C:5E:0C:85:E1:DB server=dhcp1
add address=44.30.241.25 mac-address=4C:5E:0C:8A:57:8E server=dhcp1
/ip dhcp-server network
add address=44.30.241.16/28 dns-server=44.30.244.1,44.30.245.1 domain=\
    NMHamWAN.net gateway=44.30.241.17 netmask=28 ntp-server=\
    44.30.244.4,44.30.245.4
/ip dns
set servers=44.30.244.1,44.30.245.1
/ip firewall mangle
add action=change-mss chain=output new-mss=1378 protocol=tcp tcp-flags=syn \
    tcp-mss=!0-1378
add action=change-mss chain=forward new-mss=1378 protocol=tcp tcp-flags=syn \
    tcp-mss=!0-1378
/ip route
add distance=1 dst-address=44.30.255.48/29 gateway=44.30.241.28
add distance=1 dst-address=44.30.255.112/29 gateway=44.30.241.25
/ip service
set telnet address=44.30.240.0/20 disabled=yes
set ftp address=44.30.240.0/20 disabled=yes
set www address=44.30.254.0/24
set ssh address=44.0.0.0/9,44.128.0.0/10
set api address=44.30.240.0/20 disabled=yes
set winbox address=44.30.254.0/24
set api-ssl address=44.30.240.0/20 disabled=yes
/routing filter
add action=accept chain=AMPR-default prefix=44.0.0.0/8 prefix-length=8-32
add action=accept chain=AMPR-default prefix=0.0.0.0/0
add action=reject chain=AMPR-default
/routing ospf interface
add authentication=md5 authentication-key=? interface=ether1 \
    network-type=broadcast
/routing ospf network
add area=backbone network=44.30.241.0/28
/snmp
set contact="#HamWAN-Support on irc.freenode.org" enabled=yes
/system clock
set time-zone-autodetect=no time-zone-name=GMT
/system identity
set name=screst-s3
/system logging
add action=remote topics=!debug,!snmp
/system ntp client
set enabled=yes primary-ntp=44.30.244.4 secondary-ntp=44.30.245.4
/tool sniffer
set filter-interface=all filter-ip-address=44.30.255.6/32
[n5hc@screst-s3] >