<div dir="ltr">I'm using web based speed test to judge my signal, they are a lot different than what I'm seeing via the terminal.<div>My questions;</div><div>1. Is </interface wireless monitor 0> the best command to use when tweaking the dish alignment?</div><div>2. With a noise floor of around -121 would I see big benefits from purchasing the Sleeve30?</div><div>3. My ccq's sure vary throughout the day irregardless on a stable noise floor. Why</div><div>I hope you all have a wonderful Thanksgiving, I'm grateful for all those of you who have helped me here.</div><div>-Ric</div><div><br><div><br></div><div><br></div><div>[ric@K7ITE-Lookout] > /interface wireless monitor 0<br>                  status: connected-to-ess<br>                 channel: 5900/10/an<br>       wireless-protocol: nv2<br>                 tx-rate: 57.7Mbps-10MHz/2S/SGI<br>                 rx-rate: 43.3Mbps-10MHz/2S/SGI<br>                    ssid: HamWAN<br>                   bssid: 74:4D:28:57:F6:BA<br>              radio-name: Lookout-S2/WA7DEM<br>         signal-strength: -65dBm<br>     signal-strength-ch0: -67dBm<br>     signal-strength-ch1: -69dBm<br>      tx-signal-strength: -65dBm<br>  tx-signal-strength-ch0: -71dBm<br>  tx-signal-strength-ch1: -67dBm<br>             noise-floor: -121dBm<br>         signal-to-noise: 56dB<br>                  tx-ccq: 90%<br>                  rx-ccq: 80%<br>   authenticated-clients: 1<br>        current-distance: 31<br>                wds-link: no<br>                  bridge: no<br>        routeros-version: 6.45.2<br>                 last-ip: 172.217.3.174<br>       current-tx-powers: 6Mbps:27(27/30),9Mbps:27(27/30),12Mbps:27(27/30),18Mbps:27(27/30),24Mbps:27(27/30),36Mbps:27(27/30),48Mbps:25(25/28),54Mbps:24(24/27),HT20-0:27(27/30),HT20-1:27(27/30),<br>                          HT20-2:27(27/30),HT20-3:27(27/30),HT20-4:27(27/30),HT20-5:26(26/29),HT20-6:25(25/28),HT20-7:23(23/26)<br>     notify-external-fdb: no<br></div></div></div>