<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
  </head>
  <body>
    I'm not sure what's going wrong, but I can verify that S3.ETiger is
    running and has 5 clients connected to it.  I suspect you might be
    aiming at the towers on west tiger (47.508761°, -121.984954°) and
    (47.504856°, -121.971615°) whereas the HamWAN site is on east tiger
    (47.488172°, -121.946733°).  From your picture, you should see a 3rd
    tower or cluster of towers further towards the right, if that is the
    case.  Google Earth is a good tool to get a sense of the visuals,
    since it lets you tilt the world.<br>
    <br>
    --Bart<br>
    <br>
    <br>
    <div class="moz-cite-prefix">On 9/11/2021 4:58 PM, Paul Sundquist
      wrote:<br>
    </div>
    <blockquote type="cite"
      cite="mid:F06CA72D-EE7A-4B1A-A5CB-FCEEEEF8ADB1@foxhill.org">
      <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
      New install on Squak Mountain Issaquah and unable to find any
      signal on Tiger Mountain. I’m 3.5 miles away west and a little
      north of the tower on Tiger.
      <div class="">Clear line of sight. Please validate with the tower
        picture attached.<br class="">
        <div class=""><br class="">
        </div>
        <div class="">Installed the following: </div>
        <div class="">MikroTik mANT30 PA parabolic dish antenna 5GHz
          30dBi MTAD-5G-30D3-PA</div>
        <div class="">Mikrotik BaseBox 5 RB912UAG-5HPnD-OUT 5GHz Outdoor
          Wireless AP Gigabit USB OSL4</div>
        <div class=""><br class="">
        </div>
        <div class="">Questions:</div>
        <div class="">Q1) Is the antenna tower on the right in the
          picture the right site?</div>
        <div class="">Q2) Is the dish assembled correctly? See picture.</div>
        <div class="">Q3) I was watching the signal strength on the
          routerboard while running "/interface wireless scan 0”.
          Nothing showed up on the terminal session and no signal
          strength LED’s lit up. I moved it left to right and adjusted
          azimuth each time I stopped.</div>
        <div class="">Q4) How long should you wait to acquire the signal
          between each time you move it?</div>
        <div class="">Q5) Is there anything like the signal strength
          tones aiming a DirecTV dish?</div>
        <div class="">Q6) Any other ideas. My exported configuration is
          below and I’ve successfully completed every step listed here: <a
            href="https://hamwan.org/Standards/Network
            Engineering/Client Node Configuration.html" class=""
            moz-do-not-send="true">https://hamwan.org/Standards/Network%20Engineering/Client%20Node%20Configuration.html</a> </div>
        <div class=""><br class="">
        </div>
        <div class="">Thanks for your help!</div>
        <div class="">-Paul KK7AMW</div>
        <div class=""><br class="">
        </div>
      </div>
      <div class="">
        <!--StartFragment-->
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">[admin@KK7AMW-Issaquah]
          > export</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class=""># sep/08/2021
          16:57:46 by RouterOS 6.48.4</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class=""># software id =
          H1Z0-P9F3</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">#</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class=""># model =
          912UAG-5HPnD</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class=""><br class="">
        </div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/interface wireless</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set [ find
          default-name=wlan1 ] band=5ghz-onlyn country=no_country_set
          disabled=no
          frequency-mode=superchannel radio-name=KK7AMW/Issaquah-Tiger
          scan-list=HamWAN
          ssid=HamWAN \</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">    wireless-protocol=nv2</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/interface list</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add name=WAN</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add name=LAN</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/interface wireless
          channels</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add band=5ghz-onlyn
          comment="Cell sites radiate this at 0 degrees (north)"
          frequency=5920
          list=HamWAN name=Sector1-5 width=5</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add band=5ghz-onlyn
          comment="Cell sites radiate this at 120 degrees (south-east)"
          frequency=5900 list=HamWAN name=Sector2-5 width=5</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add band=5ghz-onlyn
          comment="Cell sites radiate this at 240 degrees (south-west)"
          frequency=5880 list=HamWAN name=Sector3-5 width=5</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add band=5ghz-onlyn
          comment="Cell sites radiate this at 0 degrees (north)"
          frequency=5920
          list=HamWAN name=Sector1-10 width=10</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add band=5ghz-onlyn
          comment="Cell sites radiate this at 120 degrees (south-east)"
          frequency=5900 list=HamWAN name=Sector2-10 width=10</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add band=5ghz-onlyn
          comment="Cell sites radiate this at 240 degrees (south-west)"
          frequency=5880 list=HamWAN name=Sector3-10 width=10</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/interface wireless
          security-profiles</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set [ find
          default=yes ] supplicant-identity=MikroTik</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/snmp community</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set [ find
          default=yes ] addresses=44.24.240.0/20 name=hamwan</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/system logging
          action</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set 3
          remote=44.24.244.8</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/interface list
          member</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add interface=wlan1
          list=WAN</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add list=LAN</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/ip address</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add
          address=192.168.86.53/24 interface=ether1 network=192.168.86.0</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/ip dhcp-client</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add disabled=no
          interface=wlan1</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/ip dns</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set
          servers=192.168.86.9</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/ip firewall mangle</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add
          action=change-mss chain=output new-mss=1378 protocol=tcp
          tcp-flags=syn
          tcp-mss=!0-1378</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add
          action=change-mss chain=forward new-mss=1378 protocol=tcp
          tcp-flags=syn
          tcp-mss=!0-1378</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/ip route</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add distance=1
          gateway=192.168.86.1</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/ip service</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set telnet
          disabled=yes</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set ftp disabled=yes</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set www disabled=yes</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set ssh port=222</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set api disabled=yes</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set api-ssl
          disabled=yes</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/snmp</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set
          contact="#HamWAN-Support on <a href="http://irc.freenode.org"
            class="" moz-do-not-send="true">irc.freenode.org</a>"
          enabled=yes
          location=47.516944,-122.0452</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/system clock</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set
          time-zone-name=America/Los_Angeles</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/system identity</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set
          name=KK7AMW-Issaquah</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/system logging</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add action=remote
          topics=info</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add action=remote
          topics=warning</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">add action=remote
          topics=error</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/system ntp client</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set enabled=yes
          primary-ntp=44.24.244.4 secondary-ntp=44.24.245.4</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">/system routerboard
          settings</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">set
          boot-device=try-ethernet-once-then-nand</div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class="">[admin@KK7AMW-Issaquah]
          ></div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class=""><img apple-inline="yes"
            id="29B54B67-4117-4237-82B8-6E2E35A8270B"
            src="cid:part3.13BC734B.3836638E@bartk.us" class=""></div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class=""><img apple-inline="yes"
            id="850956ED-EC2E-4776-8400-32694DC2FF5E"
            src="cid:part4.48DF8A93.FA380B67@bartk.us" class=""></div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class=""><br class="">
        </div>
        <div style="margin: 0in; font-family: Calibri; font-size: 11pt;"
          class=""><img apple-inline="yes"
            id="C80AC658-15BF-4884-B992-77800D9A0195"
            src="cid:part5.A5B31FF6.7EEA8DFE@bartk.us" class=""></div>
        <!--EndFragment--></div>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <pre class="moz-quote-pre" wrap="">_______________________________________________
PSDR mailing list
<a class="moz-txt-link-abbreviated" href="mailto:PSDR@hamwan.org">PSDR@hamwan.org</a>
<a class="moz-txt-link-freetext" href="http://mail.hamwan.net/mailman/listinfo/psdr">http://mail.hamwan.net/mailman/listinfo/psdr</a>
</pre>
    </blockquote>
    <br>
  </body>
</html>