[HamWAN PSDR] Paine routing was broken, is fixed now

[Bart Kus]

Kyle,

On a related subject, can we get your node's GPS location so we can add 
it to the map and real-time signal reporting?

--Bart


On 2/22/2015 12:59 PM, Tom Hayward wrote:
> On Sun, Feb 22, 2015 at 12:04 PM, Kyle Burgess <kd7iyt at gmail.com> wrote:
>> Sorry about that.  I accidentally applied the wrong settings to the Metal
>> when configuring it yesterday.  It caused me to lose connection to the Metal
>> and obviously created more of a problem than I was aware of.  After doing a
>> factory reset and re-following the client install directions, I then got it
>> to connect properly.
> This wasn't your fault. The sector should never have been configured
> to request DHCP from you.
>
>> FYI..  Some of the client install directions could use some tweaking as they
>> may be misleading for some.  The NTP synchronization step should probably be
>> pushed farther to the end of the directions (after connecting to the
>> network).  Also, when configuring the local DHCP server, step 2 needs to
>> define the network address, not the local ethernet address (i.e.
>> 192.168.88.0/24, not 192.168.88.1/24 like it shows).
> Fixed.
>
> If you check the history on that wiki page, you'll see quite a few
> edits in the last few days. I clarified some things and introduced
> some new issues (like the DHCP server network).
>
> Tom
>
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org