[HamWAN PSDR] Paine routing was broken, is fixed now

[Tom Hayward]

On Sun, Feb 22, 2015 at 12:04 PM, Kyle Burgess <kd7iyt at gmail.com> wrote:
> Sorry about that.  I accidentally applied the wrong settings to the Metal
> when configuring it yesterday.  It caused me to lose connection to the Metal
> and obviously created more of a problem than I was aware of.  After doing a
> factory reset and re-following the client install directions, I then got it
> to connect properly.

This wasn't your fault. The sector should never have been configured
to request DHCP from you.

> FYI..  Some of the client install directions could use some tweaking as they
> may be misleading for some.  The NTP synchronization step should probably be
> pushed farther to the end of the directions (after connecting to the
> network).  Also, when configuring the local DHCP server, step 2 needs to
> define the network address, not the local ethernet address (i.e.
> 192.168.88.0/24, not 192.168.88.1/24 like it shows).

Fixed.

If you check the history on that wiki page, you'll see quite a few
edits in the last few days. I clarified some things and introduced
some new issues (like the DHCP server network).

Tom