[HamWAN PSDR] Client configuration instructions

Bart Kus me at bartk.us
Thu Aug 29 21:10:05 PDT 2013


Good catches.

In terms of "input does not match any value of name" it looks like a bug 
in the command-line interface.  I can repro it here:

[eo at AE7SJ-Paine] /interface wireless> set wlan1 scan-list=HamWAN
input does not match any value of name
[eo at AE7SJ-Paine] /interface wireless> set wlan1 scan-list=default
[eo at AE7SJ-Paine] /interface wireless> set wlan1 scan-list=Sector2
input does not match any value of name
[eo at AE7SJ-Paine] /interface wireless> set wlan1 scan-list=5905
[eo at AE7SJ-Paine] /interface wireless> set wlan1 scan-list=HamWAN
input does not match any value of name
[eo at AE7SJ-Paine] /interface wireless> print
Flags: X - disabled, R - running
  0  R name="wlan1" mtu=1500 mac-address=D4:CA:6D:7A:B8:23 arp=enabled 
interface-type=Atheros AR92xx mode=station ssid="HamWAN" frequency=5905
       band=5ghz-onlyn channel-width=5mhz *scan-list=5905* 
wireless-protocol=nv2 wds-mode=disabled wds-default-bridge=none 
wds-ignore-ssid=no
       bridge-mode=enabled default-authentication=yes 
default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 
hide-ssid=no
       security-profile=default compression=no

You can see the scan-list was NOT set properly.  However, if you set it 
using WinBox it DOES set it properly AND uses it properly to scan 
through the channels.  I'll try to reach out to Mikrotik support to get 
their take on this.

In terms of your other report of no such thing existing, drop the 
initial "Interface".  It's just Wireless, and then the rest of the click 
path is OK.



You can see Signal Strength readings there.

--Bart



On 8/29/2013 8:55 PM, Jeff Francis^(TM) wrote:
>   Oh, one other thing.  There's a line that says:
>
> "Point your dish at any cell site and optimize for best signal. Look 
> at the Interface -> Wireless -> wlan1 -> Status signal strength 
> reports while you align."
>
> Not sure what the equivalent is in OS 6.2, but there's no such critter 
> that I can find.  The closest thing I've found is clicking on "Quick 
> Set" where there's a display of signal strength, SNR, etc.
>
>
>
>
> On Thu, Aug 29, 2013 at 8:37 PM, Jeff Francis^(TM) <jeff at gritch.org 
> <mailto:jeff at gritch.org>> wrote:
>
>       I tried configuring mine this evening, and it mostly went well,
>     except for this line:
>
>     [admin at N0GQ-KPAE] /interface wireless> set 0 disabled=no
>     frequency-mode=superchannel scan-list=HamWAN ssid=HamWAN
>     wireless-protocol=nv2
>     input does not match any value of name
>     [admin at N0GQ-KPAE] /interface wireless>
>
>       I'm afraid I'm not yet familiar enough with RouterOS to make
>     heads or tails of that error message.  I tried some obvious (and
>     non-obvious) things, and managed to get some new and improved
>     error messages, but never managed to quite figure out what I'm
>     doing wrong.
>
>       I haven't tried adding the keys and accounts yet.  Figured
>     there's no point in worrying about that until I can get the thing
>     linked up to KPAE.
>
>       FWIW, I've re-opened the hole in my firewall if you want to
>     debug (per earlier irc chat).
>
>
>
>     On Thu, Aug 29, 2013 at 6:29 PM, Bart Kus <me at bartk.us
>     <mailto:me at bartk.us>> wrote:
>
>         Hi all,
>
>         Due to popular demand, I've thrown together a page that should
>         take you from unboxing a Metal 5SHPn modem to getting it on
>         the air.  See here for instructions:
>
>         https://www.hamwan.org/t/tiki-index.php?page=Client+Node+Configuration&structure=HamWAN
>
>         NQ1E, if you could attach key-dsa-NQ1E.txt to that page
>         when/if you see this, that would complete the instructions for
>         now.
>
>         Please let me know if the instructions need fixing or improving.
>
>         --Bart
>
>
>         _______________________________________________
>         PSDR mailing list
>         PSDR at hamwan.org <mailto:PSDR at hamwan.org>
>         http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org
>
>
>
>
>     -- 
>     -=jeff=-
>
>
>
>
> -- 
> -=jeff=-
>
>
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20130829/1d360d0c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dhbjgidi.png
Type: image/png
Size: 63568 bytes
Desc: not available
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20130829/1d360d0c/attachment.png>


More information about the PSDR mailing list