[HamWAN PSDR] 44.x.x.x HamWAN network at Paine

[John Hays]

It should be on a dedicated router on its own segment.  

Sent from my iPhone

> On Apr 27, 2014, at 9:27 AM, Dean Gibson AE7Q <hamwan at ae7q.com> wrote:
> 
> The only "authentication" the radio has, are the following:
> The radio can be set to only receive remote transmissions that include a two-digit decimal code; or
> The radio can be set to only receive remote transmissions that are addressed to the callsign programmed into the receiving radio (I would recommend this setting).
> Any other authentication would have to be provided by a router or firewall.
> 
>> On 2014-04-26 22:39, Bart Kus wrote:
>> Any packets on that LAN are considered trusted since they passed authentication.  What's the auth story on the 23cm modems? 
>> 
>> --Bart 
>> 
>>> On 4/26/2014 10:37 PM, Tom Hayward wrote: 
>>>> On Sat, Apr 26, 2014 at 9:26 PM, Dean Gibson AE7Q <hamwan at ae7q.com> wrote: 
>>>> At the Snohomish County DEM, place a router (or bridge) between the ID-1 and the 44.24.240.x network. 
>>>> In this scenario, the ID-1 located at my house would also be connected to a router that acts as though it were directly connected to the 44.24.240.x (or any other) network at the DEM.
>>> We have a router at Snohomish County DEM with an extra port that could be used for this. The subnet there is 44.24.240.128/28. We have another subnet of address pairs set aside for router-to-router links. So as far as networking goes, we could execute your plan. I can't commend about the feasibility of any of the other bits.         
>>> 
>>> Tom
> 
> _______________________________________________
> PSDR mailing list
> PSDR at hamwan.org
> http://mail.hamwan.org/mailman/listinfo/psdr_hamwan.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.hamwan.net/pipermail/psdr/attachments/20140427/54eee386/attachment.html>